Shopping Guide · Product Overview
iCarsoft CR MAX Multi-System Diagnostic Scanner
The iCarsoft CR MAX is a professional automotive diagnostic scanner tablet designed for full-system diagnostics, advanced bi-directional control, OE-level ECU coding and 50 service functions across supported vehicles.
- Full-system diagnostics
- Bi-directional control
- 50 service functions
- OE-level ECU coding
- CAN-FD support
Availability: Check the official store for current stock status, shipping estimates and pricing.
Check CR MAX at iCarsoftAffiliate disclosure: Shopping Guide may earn a commission if you buy through links on this page, at no extra cost to you. This is an independent product guide, not the official iCarsoft store. Product names and trademarks belong to their respective owners.
At a glance
A workshop-grade diagnostic tablet
The CR MAX pairs dealer-level diagnostic software with a 7-inch Android tablet, direct 16-pin OBD2 connection, full bi-directional control, OE-level ECU coding and lifetime free Wi-Fi software updates. It is designed for serious DIY users and independent repair shops.
Full-system diagnostics
Scan engine, transmission, ABS, SRS airbags, body, chassis and other supported onboard ECUs. Read and clear fault codes, view ECU information, live data and freeze-frame data.
Advanced bi-directional control
Send commands to supported vehicle components and observe their response, including ABS pumps, fuel pumps, window regulators, throttle systems, cooling fans and selected valves.
OE-level ECU coding
Supports ECU coding across eight major vehicle groups listed by the manufacturer, including module adaptation, parameter calibration and selected personalization features.
50 service functions
The manufacturer groups 9 commonly used service functions and 41 advanced professional functions for maintenance and repair tasks.
CAN-FD support
Supports CAN-FD protocol. Vehicle and protocol compatibility depends on make, model, year and the specific diagnostic function.
Lifetime free updates
Software updates are delivered over Wi-Fi, with new diagnostic protocols and vehicle coverage released through software updates. No annual subscription fee is listed.
Tablet and interface
A 7-inch Android command center
The CR MAX features a 7-inch HD touchscreen powered by a 1.3GHz quad-core processor, with 64GB of storage and a rechargeable 5000mAh battery. The manufacturer lists up to five hours of continuous operation.
- 7-inch HD touchscreen
- Android operating system
- 1.3GHz quad-core processor
- 64GB storage
- 5000mAh rechargeable battery
- Wi-Fi software updates

Worldwide vehicle coverage
Coverage across 58 vehicle makes
The official product page lists 58 vehicle makes across European, American and Asian manufacturers. Vehicle coverage and available functions vary by model, production year and ECU configuration. The manufacturer advises sending the VIN to confirm compatibility if a vehicle is not listed.
European makes
Examples listed by the manufacturer include BMW, Mercedes-Benz, Smart, Sprinter, Maybach, Volkswagen, Audi, Porsche, Volvo, Jaguar, Land Rover, Ferrari, Bentley, Rolls-Royce, Lamborghini, Renault, Peugeot, Citroën, Fiat, Opel, Mini, Skoda and Seat.
American makes
Examples listed include Ford, Chrysler, Jeep, Dodge, General Motors, Buick-related GM coverage, Cadillac-related GM coverage, and other listed US makes and variants.
Asian makes
Examples listed include Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Mitsubishi, Subaru, Suzuki, Mazda, Hyundai, Kia, Isuzu and other listed Asian manufacturers.
This is a selection of brands named on the manufacturer's page, not a substitute for checking the full compatibility list. The official page lists 58 makes worldwide; confirm your exact vehicle and required functions before purchase.
Advanced feature
OE-level ECU coding for eight major vehicle groups
The manufacturer states that ECU coding is currently available for the eight groups below, with support for additional brands being rolled out through software updates.
| Vehicle make / group | Supported years shown | Primary application | Software diagnostics entry path |
|---|---|---|---|
| BMW | 2006–Present | ECU troubleshooting and data recovery | Main Menu → Coding |
| V.A.G. (VW, Audi, Skoda, Seat) | 2010–Present | Component adaptation and parameter calibration | Main Menu → Coding |
| Hyundai / KIA | 2010–Present | Module matching and data migration (backup/clone) | Service → Variant Coding |
| Ford | 2003–2023 | Hidden function activation and personalization | Programming → Programmable Parameters |
| Mazda | 2003–2020 | Hidden function activation and personalization | Programming → Programmable Parameters |
| Renault | 2005–Present | Comfort features and system customization | Service → Configure Function |
| Chrysler / Jeep / Dodge | Specific years | Alert logic and basic vehicle settings | Service → Coding |
| Subaru | 2014–Present | Warning systems and functional toggles | Service → VSP Category |
Manufacturer-listed coding applications include: ECU troubleshooting and data recovery; component matching and data migration; parameter calibration; activation of selected hidden features; customization of comfort features and alerts; and vehicle-setting adjustments. Coding availability depends on vehicle and software coverage. Hyundai/Kia backup and clone is listed as an exclusive function for that group.
Modern vehicle networks
CAN-FD support and optional DoIP
CAN-FD (Controller Area Network – Flexible Data-rate) and DoIP (Diagnostic Communication over Internet Protocol) are communication protocols used by modern vehicle platforms. The manufacturer describes CAN-FD support for 2020-and-newer GM and Chrysler models and lists DoIP-compliant vehicles including Volvo, Land Rover/Jaguar and BMW F- and G-chassis models, among others.
- CAN-FD: Supported.
- DoIP: Optional accessory for the CR MAX.
- Connection: Direct 16-pin OBD2 main cable.
DoIP accessory
The CR MAX is DoIP-ready, but the DoIP accessory is optional and sold separately. Confirm the accessory and compatibility requirements for your vehicle if DoIP communication is needed.
View CR MAX detailsActive tests
Command components and observe their response
Bi-directional controls allow the scanner to send commands to supported vehicle systems. The official page highlights these examples:
ABS pump motor
Command the ABS pump and observe its response in real time.
Window regulators
Activate supported window regulators and run output tests.
Fuel pump
Trigger the fuel pump on demand to help check component operation.
Throttle
Open the throttle and run supported output tests.
EGR valve
Drive the valve open and closed on supported vehicles.
Fuel injectors
Command or cut individual injectors on supported vehicles to help isolate misfires.
Cooling fans
Trigger supported fan speeds to check relays and motors.
Transmission solenoids
Sequence supported shift solenoids to help investigate shifting issues.
Active tests vary by vehicle, module and software coverage. A listed example does not guarantee availability on every vehicle.
Vehicle identification
Fast AutoVIN identification
Connect the scanner to a supported vehicle and AutoVIN can identify the vehicle without manual VIN entry. If AutoVIN does not recognize a vehicle, the manufacturer says users can send the VIN to support for confirmation and manually select the vehicle in the meantime.
Diagnostic history and reports
- Access previously tested vehicle systems
- Save, share and print diagnostic reports
- Use the Feedback function to report issues to the technical team
- Connect to a Windows PC via USB to print diagnostic data for reference
Language support
Supports 15 languages
The manufacturer lists these interface languages:
50 service functions
9 everyday resets and 41 professional procedures
The CR MAX combines commonly used maintenance functions with advanced professional service procedures. The manufacturer notes that service-function availability varies by vehicle make, model, production year and ECU configuration.
Core maintenance functions
- Oil Reset: Reset engine oil life, service lamp, service mileage and service intervals after an oil change.
- Electronic Throttle Control: Relearn throttle control parameters after resetting or replacing the throttle body.
- EPB-Brake-Pad Reset: Retract electric parking brake calipers and reset brake pads after replacement.
- Steering Angle Reset (SAS): Calibrate the steering wheel straight-ahead position or recalibrate the SAS after steering component replacement.
- DPF Regeneration: Perform DPF regeneration, component replacement initialization and DPF relearning after engine control unit replacement.
- Injector Coding: Relearn injector control parameters when an injector is renewed or replaced.
- ABS Bleeding: Bleed air from the system or perform a relearn procedure after ABS replacement.
- Air Suspension Service: Calibrate, adjust height, reset the system and clear fault codes for supported air suspension systems.
- Battery Management Service (BMS): Evaluate battery charge state, monitor closed-circuit current, register battery replacement and activate vehicle sleep mode.
- TPMS Reset: Read tire sensor IDs from the vehicle ECU, enter replacement sensor IDs and test sensors.
Additional service functions
- Air Conditioner Service: A/C adaptation reset, compressor reset, compressor break-in and stepper motor initialization.
- Head Lamp Service: Initialize the adaptive headlamp system.
- Body Stability Control Service: Reset or delete DSC adaptation values and initialize the unit.
- Engine Control Service: Reset or delete engine-module adaptation values and calculate fuel consumption.
- Transmission Control Service: Reset transmission adaptation values and transmission-fluid-level adaptation.
- Air-Bag Reset: Reset airbag data to clear the SRS warning light after a collision.
- Seat Service: Calibrate after repairing or replacing the seat-position drive motor.
- Immobilizer Service: Match anti-theft systems, disable lost keys and add new keys; for vehicles with a basic immobilizer system.
- Engine Idle Service: Adjust engine idle speed.
- Door-Window-Roof: Learn the top position of door-window glass for pinch protection and one-touch-up.
- Fuel Pump Service: Activate the fuel pump after replacement.
- Air Filter Control Service: Initiate self-learning after replacing the air filter.
- ODO Meter Reset: Read odometer values stored in multiple ECUs for service and verification purposes.
- Door Service: Calibrate after window-lift motor repair or replacement.
- Turbocharger: Perform turbocharger learning after replacement or reset stored learned values.
Professional functions · Part 1
- Exhaust Gas Recirculation (EGR): Recirculate a portion of engine exhaust gas back into the intake system.
- Engine Cylinder Service: Inspect, maintain and diagnose the engine cylinder system.
- Engine Correction Service: Calibrate engine-module data.
- AdBlue: Reset the AdBlue (urea) level counter after diesel exhaust fluid is refilled or replaced.
- Clutch Matching: Learn clutch contact point and engagement position after ECU, transmission or clutch replacement; for adaptive clutches only.
- Electronic Water Pump: Activate the electronic water pump for testing or after replacement.
- Crankshaft Learning: Perform crankshaft-position learning and related calibration after engine repair.
- High Voltage Battery: Support EV/hybrid high-voltage battery maintenance, including replacement adaptation and status monitoring.
- Cruise Control System: Perform adaptive cruise control (ACC) calibration and personalization.
- Language Setting: Change the vehicle system language.
- Radar/Camera: Perform radar and camera learning and calibration.
- Vehicle Setup: Personalize vehicle driving and comfort preferences.
- Cylinder Shutoff Test: Test cylinders individually by disabling fuel supply to help diagnose misfires or low compression.
- Speed Limit Assist: Set or remove the vehicle maximum speed limit.
- Head-Up Display: Perform learning and calibration of the head-up display.
Professional functions · Part 2
- Cylinder Misfire Check: Identify engine misfires associated with sluggish acceleration, high fuel consumption or vibration.
- Control Unit Reset: Reset and initialize vehicle control units after part replacement or fault repair.
- O2S (Oxygen Sensor): Support oxygen-sensor replacement adaptation and initialize three-way catalytic converter learned values.
- Seat Belt: Reset seatbelt pretensioner and related maintenance after airbag deployment.
- Gas Particulate Filter: Perform service operations including GPF replacement and regeneration.
- NOx Sensor: Reset NOx-sensor-related learned values stored in the ECU.
- Rain-Light Sensor: Calibrate the rain sensor after windshield replacement or sensor renewal.
- Stop And Start: Set up the automatic start-stop function in the ECU.
- Mileage Verification: Check and compare odometer data stored across multiple ECUs to detect inconsistencies.
- VIN Verification: Read and match VIN across vehicle ECUs to detect inconsistencies or unauthorized module replacement.
- Miscellaneous: Additional service functions may be available in the Miscellaneous section.
The product page groups the service functions into 9 commonly used and 41 advanced professional functions. Individual procedures and the makes supporting them vary by vehicle, production year and ECU configuration.
Additional special services
Vehicle-specific procedures listed separately
The official product page also lists 38+ additional special service procedures for selected vehicle groups. These are presented separately from the 50 service functions above.
BENZ / SPRINTER / SMART
- Teach-in of drive authorization system
- Teach-in of camshaft position
- Adjustment of intake valves
- Upstream oxygen sensor procedure
- NOx storage catalytic converter replacement
- Reset learned values of NOx sensor upstream of SCR
- Teach-in after replacement of downstream SCR NOx sensor
- Reset adjustment values
- Teach-in pedal angle sensor
- Teach-in intake port shutoff
- Write wheel electronics identification number
JAGUAR / LAND ROVER
- Yaw rate sensor adjustment
- Powertrain configuration reset
- Stepper motor initialisation
- Re-program all stepper motors service
- Reset air conditioning compressor service
VAG (VW / AUDI)
- Basic settings
- Adaptation
- Coding / Code II
- Security login
PORSCHE
- Standardizing power windows
- Combination sensor adjustment
- AHBA adjustment
- Headlight beam adjustment
- Longitudinal acceleration sensor adjustment
- Fuel-level adjustment
- Rear lid adjustment
- Seat adjustment
- Speed sensor test
- Steering column adjustment
- Swirl-flap actuator
VOLVO / SAAB
- Swirl-flap actuator
- Gear indication activating
- Oil pressure pump bleeding
- Fuel trim adaptation
- Oil level sensor adaptation
- Turbo adaptation
- Fuel pressure adaptation
- EGR adaptation
- IMU (inertial measurement unit) adjustment
- Brake pedal position adjustment
- Gear position adjustment
Emission diagnostics
All 10 OBD2 test modes
The manufacturer states support for all 10 OBD2 test modes on vehicles compliant with 1996+ OBDII/EOBD/JOBD/KOBD/CAN/CAN-FD standards.
01 · Read Codes
02 · Erase Codes
03 · I/M Readiness
04 · Live Data
05 · Freeze Frame
06 · Vehicle Information
07 · O2 Monitor Test
08 · On-Board Monitor Test
09 · EVAP System Test
10 · Pending Codes
Older vehicle connections
Optional diagnostic adapters
The manufacturer lists optional adapters for certain older vehicles. These adapters are available separately and should be selected based on the vehicle's diagnostic connector.
- Mercedes-Benz 38-pin adapter: For compatible pre-2003 Mercedes-Benz passenger vehicles, including selected C-Class W202, E-Class W210, S-Class W140, CLK-Class W208, SLK-Class R170 and SL-Class R129 models.
- BMW 20-pin adapter: For listed older BMW models, including E30, E36, early E46, E34, early E39, E32, E38, E36 Z3, E52, early E53, E31, E28, E24 and E23.
- Sprinter 14-pin adapter: For Sprinter T1N and early NCV3 vans; the official page lists 1995–2006 models.

Adapter requirements depend on the exact vehicle and connector. Confirm compatibility and package contents with the manufacturer before ordering.
Technical details
iCarsoft CR MAX specifications
| Operating system | Android |
|---|---|
| Processor | Quad-core 1.3 GHz |
| Storage | 64GB |
| Display | 7-inch HD touchscreen, 1024 × 600 resolution |
| Connectivity | USB 2.0 / Wi-Fi / Bluetooth / OBDII |
| Battery capacity | 3.7V 5000mAh, 18.5Wh |
| Tested battery life | Up to 5 hours of continuous use |
| Type-C input | 5V / 2A |
| Power consumption | 500mA (LCD on with default brightness, Wi-Fi on) at 3.7V |
| Operating temperature | 0 to 50°C (32 to 122°F) |
| Storage temperature | −20 to 70°C (−4 to 158°F) |
| Operating humidity | 5%–95%, non-condensing |
| Dimensions (W × H × D) | 240.0 × 150.0 × 35.0 mm (9.45 × 5.91 × 1.38 in) |
| Net weight | Approximately 750g |
| Supported automotive protocols | ISO 9141-2, ISO 14230-2, ISO 15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO 11898 (high-speed, medium-speed, low-speed and single-wire CAN), CAN-FD, SAE J2610, G.M UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0 and TP1.6 |
In the box
Package contents
- CR MAX vehicle diagnostic tool
- Main cable
- Charging cable
- Carry case
- User manual
Updates and support
Software support
The manufacturer lists lifetime free Wi-Fi software upgrades, without an annual subscription fee. If AutoVIN does not recognize your vehicle, the official FAQ advises sending the VIN to support for compatibility confirmation; manual vehicle selection can be used in the meantime.
For codes that cannot be cleared or that return after clearing, the manufacturer advises keeping the ignition on and engine off, recording freeze-frame data before clearing, and repairing persistent hardware faults first.


Common questions
Frequently asked questions
Are software updates free?
Yes. The manufacturer lists lifetime free Wi-Fi software upgrades without an annual subscription fee.
Can the CR MAX clear ABS and airbag codes?
The product provides full-system diagnostics, including reading and clearing codes for supported ABS, SRS airbags, engine, transmission and other vehicle systems. Functions depend on the vehicle and module.
Does the CR MAX have a built-in battery?
Yes. The listed battery is 3.7V 5000mAh (18.5Wh), with up to five hours of continuous use stated by the manufacturer.
Does every service function work on every vehicle?
No. The manufacturer states that service functions vary by vehicle make, model, production year and ECU configuration. Confirm support for your exact vehicle and required functions.
Is DoIP included?
DoIP is an optional accessory for the CR MAX. It is not listed as standard equipment for this model.
What if AutoVIN does not recognize my vehicle?
The manufacturer says you can send your VIN to support for compatibility confirmation and manually select your vehicle model in the meantime.
What is the difference between CR MAX, CR MAX BT and CR Max P?
The official comparison lists the CR MAX as a 7-inch cabled model, the CR MAX BT as a 7-inch wireless model and the CR Max P as a 10-inch flagship model. The comparison page lists 58 vehicle makes and 50 service functions for all three; DoIP is optional on CR MAX and CR MAX BT and standard on CR Max P.
Next step
Explore the iCarsoft CR MAX
Review the official product listing for current product details, package information, shipping, warranty terms and compatibility with your vehicle.
View CR MAX at iCarsoftShopping Guide is an independent affiliate publisher and is not operated by iCarsoft. Product names and trademarks belong to their respective owners.
